QUALITYProducts.
SINCE 1948.

• Heavy-gauge galvanized construction
  Corrosion-resistant wall box, frame, and blade stand up to moisture, ammonia, and daily washdowns—built for long service life in barns, greenhouses, and storage rooms.

• Rolled inlet venturi
  Aerodynamic inlet reduces turbulence and pressure loss for smoother, more efficient airflow through the fan opening.

• Dual-side bird screens
  Galvanized welded screens on intake and discharge help keep debris and pests out while protecting moving components.

• Low-maintenance direct drive
  No belts or pulleys—fewer wear parts, no belt slip, and no sheave/friction losses. You get consistent output over time and lower lifetime maintenance.

• Factory-balanced propeller & vibration-isolated bearings
  Direct drive precision-balanced propeller minimizes vibration and mechanical noise for smoother, more dependable operation.

• Ships fully assembled & tested
  Arrives ready for quick field installation—shorter install windows mean less downtime for your operation.

• TEAO motors built for ag
  Totally Enclosed Air Over motors are designed for dusty/humid environments common to livestock and horticulture, supporting reliable, continuous duty.

• Flexible power, simple retrofits
  Standard 230V single-phase (115V consult factory) and 230/460V three-phase options make upgrades and replacements straightforward across facilities.

• Right size for the job
  36″, 42″, and 48″ diameters let you match airflow and static pressure to your building design (typical rating points 0.00″–0.10″ w.g.).

• Made in the USA + parts on hand
  Manufactured in the USA (with a mix of domestic and foreign components) and supported by readily available, in-stock replacement parts—many standard models are stocked for quick shipment.

• Built for agriculture’s daily demands
  From poultry and swine to dairy, greenhouses, and produce storage, the PFG direct-drive line delivers durable, dependable agricultural exhaust with low maintenance and reliable uptime.

Sizes & models (36″–48″)

• Standard diameters: 36″, 42″, 48″

• Use cases: agricultural exhaust for livestock facilities, greenhouses, and crop/produce storage

• Selection: direct-drive architecture for low maintenance and consistent output (no belts or pulleys)

Construction & finish

• Rugged galvanized build: heavy-gauge galvanized wall box, frame, and blade for corrosion resistance in demanding ag environments

• Aerodynamic inlet: rolled inlet venturi to reduce turbulence and improve airflow efficiency

• Dual-side protection: galvanized welded bird screen, front and back

• Low-maintenance drive: direct-drive hub for fewer wear parts and reliable, repeatable performance

• Finish & readiness: galvanized steel construction; ships fully assembled and factory-tested for quick field installation

• Origin & support: Made in the USA (with a mix of domestic and foreign components) with readily available, in-stock replacement parts

Motor types, voltages & horsepower range

• Motor type: Totally Enclosed Air Over (TEAO), suitable for dusty/humid agricultural settings

• Standard voltages:

  • Single-phase: 230 V (consult factory for 115 V options)

  • Three-phase: 230/460 V

• Motor HP range: 1/2 HP and 1 HP (by diameter/model)

Operating range

• Static pressure selection: fans are rated at common agricultural SP points (e.g., 0.00″–0.10″ w.g.). Select per your building design SP and required CFM

• Ambient temperature: standard TE motors for typical ag environments; contact us for high-ambient, hazardous-location, or other special-duty requirements

Round out your PFG direct-drive install with add-ons that improve control, protect against weather, and keep airflow consistent. All accessories are sized to match your fan for a clean fit.

Shutters and Dampers – Cut back-drafts and weather intrusion when fans are off. Rigid, ag-grade blades sized to each PFG diameter for fast, tidy installs

Rain hoods – Shield the opening from rain and wind without choking airflow. Flanged, all-weather hoods mount quickly on exposed walls.

Thermostats – Automatic, temperature-based staging for steady conditions and energy savings. Simple wiring for standard 230V single-phase (ask about 115V/3-phase).

PFG direct-drive agricultural exhaust fans remove heat, humidity, and contaminants across livestock and horticulture, delivering consistent output with minimal maintenance (no belts to adjust or replace).

Poultry houses (broiler, breeder, layer)

• Sidewall or end-wall exhaust for cross or tunnel ventilation.

• No belt slip means steady airflow over long grow-outs; quieter operation helps reduce stress.

• Pair with shutters and thermostats for staged, seasonal control.

Swine barns (farrowing, nursery, finishing)

• Negative-pressure exhaust to pull fresh air through ceiling or wall inlets.

• Low-maintenance drive reduces service time; steady CFM supports precise controller setpoints.

• Galvanized build handles corrosive, high-ammonia environments.

Dairy & beef (freestall, holding pens, parlors)

• Exhausts warm, humid air to support cow comfort and air quality.

• Direct-drive reliability = consistent performance during continuous duty; lower vibration around parlors.

• Ships ready for fast install during retrofits or expansions.

Greenhouses & nurseries

• End-wall exhaust to regulate temperature and humidity.

• Set-and-forget operation with steady airflow supports environmental control strategies.

• Add rain hoods on exposed walls; stage with simple thermostats.

Crop & produce storage (potato, onion, seed)

• Removes warm, moist air to reduce condensation and spoilage risk.

• Consistent CFM over time (no belt degradation) helps maintain storage setpoints.

• All-galvanized construction endures cool, damp conditions.

Equipment, pack, and utility rooms

• General exhaust for fumes and process heat.

• TEAO motors thrive in dusty, humid spaces common on farms.

• Clean, bolt-on fit with shutters for tight pressure control.

• Less to service, more to trust
  No belts or pulleys, fewer wear parts, no tension checks, and no belt slip. That means steady airflow and lower lifetime maintenance.

• Performance that holds
  With no sheave/friction losses, RPM stays consistent, helping you maintain target static pressure and predictable controller response over time.

• Smoother, quieter operation
  Factory-balanced propeller reduces vibration and mechanical noise around animals, plants, and people.

• Built for harsh ag environments
  Heavy-gauge galvanized wall box, frame, and blade with dual-side bird screens and TEAO motors for dusty, humid spaces.

• Fast install, fast uptime
  Ships fully assembled and factory-tested for quick field installation during builds, retrofits, or emergency replacements.

• Retrofit-friendly power
  Standard 230V single-phase (ask about 115V) and 230/460V three-phase options make upgrades straightforward across facilities.

• Right-sized simplicity
  Three core diameters—36″, 42″, 48″—cover common ag exhaust needs without over-spec’ing or over-maintaining.

• In stock & supported
  Many standard models are stocked for quick shipment from Arkansas, with readily available replacement parts to keep you running.

• Made in the USA
  Manufactured in the USA with a mix of domestic and foreign components, backed by decades of Triangle Engineering know-how.